Plough Mixer (Model:SYLD

General

PVG Plough Mixer is a high speed mixer with high homogeneity. During the mixing process, the raw materials are transferred around the drum in a radial, lateral and longitudinal movement by the high speed plough shears and choppers. Moreover, the mixing time is short, especially for free flowing powders or granules. Liquid additive and Heating or Cooling is also applicable.  

Working Principle

In the first case the mixing shaft and the tools are horizontally installed, thus achieving, at corresponding movement, a product reaching from a loose product bed up to a mechanically generated fluidized bed. In the second case the mixing shaft is installed in vertical direction, whereby a so called vortex is built at corresponding movement. The installation of fast-rotating chopper heads enables the mixing of products tending to lump formation. Due to the mixing tools, the material to be mixed is hereby specifically fed to the activity area of the chopper head. Besides the conventional ploughshare mixing tools a large variety of modified mixing tools is available, facilitating an optimum adaptation of the mixing tools to the individual material.

Standard Features

1.      Volume: 100-20000L

2.      Stainless Steel or Carbon Steel

3.      Plough agitator for center discharge

4.      Designed for normal temperature and normal atmospheric pressure

5.      Feed Nozzle

6.      Dust Nozzle

7.      Manually operated or Pneumatic operated flap valve

8.      Packing Seal

9.      Safety limit switch on inspection door

Optional Features

1. Carbon Steel, Stainless Steel 304, Stainless Steel 316L
2. Different type of plough according to material characteristics
3. Internal pressure
4. Sanitary type construction
5. Flap valve, butterfly valve, slide gate valve, ball valve
6. Horsepower to suit higher density materials
7. Explosion-proof motors
8. Controls such as variable frequency drives, motor starters and operator stations are available
9. Spray nozzles for liquid introduction
10. Jacket for heating or cooling

Technical parameter 

Norm and model			0.5	1	2	3	4		6	8	10			12
Loading coefficient			0.4~0.6
Power (kw)	Main motor		5.5	11	18.5	22	30		37	45	55			55
	Flying knife motor		2*1.5	3*2.2	3*3	3*3	3*4		3*4	4*4	4*4			4*4
Main axis speed (r/Min)			85	63	63	63	50		50	42	33			33
Flying knife speed (r/min) mm			1440
Size of feed port			2-300	2-300	3-300	3-300		3-350	3-350	3-350		3-350	3-350
Size of discharge port		L	2680	3160	3865	4165		4678	5190	5360		5880	6140
		W	1037	1330	1404	1504		1570	2105	2310		2310	2460
		H	1150	1166	1637	1737		2040	2360	2540		2540	2690
Equipment weight (KG)			1080	1850	2100	3050		4300	7300	9250		9250	10660